深圳市炀城实业有限公司
Shenzhen Kingtey Technology Co.,Ltd.
Shenzhen Kingtey Technology Co.,Ltd.
联系我们 / contact us
联系电话
0755-83041939/82552224
传真：0755-82552224
邮箱：mark@kingtying.cn
地址：深圳市福田区华富路南光大厦509室
主营品牌 / Brand
技术资料 / AD8392的技术资料
AD8392的技术资料
2009/4/16 15:43:55
深圳金特盈科技有限公司
AD8392的产品特征：
Four current feedback, high current amplifiers
Ideal for use as ADSL/ADSL2+ dual-channel Central Office
(CO) line drivers
Low power operation
Power supply operation from ±5 V (+10 V) up to ±12 V (+24 V)
Less than 3 mA/Amp quiescent supply current for full
power ADSL/ADSL2+ CO applications (20.4 dBm line
power, 5.5 CF)
Three active power modes plus shutdown
High output voltage and current drive
400 mA peak output drive current
44 V p-p differential output voltage
Low distortion
−72 dBc @1 MHz second harmonic
−82 dBc @ 1 MHz third harmonic
High speed: 900 V/µs differential slew rate
Additional functionality of AD8392ACP
On-chip common-mode voltage generation
AD8392的技术参数：
Table 3
Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
AD8392的产品描述：
Four current feedback, high current amplifiers
Ideal for use as ADSL/ADSL2+ dual-channel Central Office
(CO) line drivers
Low power operation
Power supply operation from ±5 V (+10 V) up to ±12 V (+24 V)
Less than 3 mA/Amp quiescent supply current for full
power ADSL/ADSL2+ CO applications (20.4 dBm line
power, 5.5 CF)
Three active power modes plus shutdown
High output voltage and current drive
400 mA peak output drive current
44 V p-p differential output voltage
Low distortion
−72 dBc @1 MHz second harmonic
−82 dBc @ 1 MHz third harmonic
High speed: 900 V/µs differential slew rate
Additional functionality of AD8392ACP
On-chip common-mode voltage generation
AD8392的技术参数：
Table 3
| Parameter | Rating |
| Supply Voltage Power Dissipation Storage Temperature Operating Temperature Range Lead Temperature Range (Soldering 10 sec) Junction Temperature |
±13 V (+26 V) |
AD8392的产品描述：
The AD8392 is comprised of four high output current, low power consumption, operational amplifiers. It is particularly well suited for the CO driver interface in digital subscriber line systems, such as ADSL and ADSL2+. The driver is capable of providing enough power to deliver 20.4 dBm to a line, while compensating for losses due to hybrid insertion and back termination resistors. In addition, the low distortion, fast slew rate, and high output current capability make the AD8392 ideal for many other applications, including medical, instrumenta-tion, DAC output drivers, and other high peak current circuits.
The AD8392 is available in two thermally enhanced packages, a 28-lead TSSOP EP (AD8392ARE) and a 5 mm × 5 mm 32-lead LFCSP (AD8392ACP). Four bias modes are available via the use of two digital bits (PD1, PD0).
Additionally, the AD8392ACP provides VCOM pins for on-chip common mode voltage generation.
The low power consumption, high output current, high output voltage swing, and robust thermal packaging enable the AD839 to be used as the CO line drivers in ADSL and other xDSL sys-
tems, as well as other high current, single-ended or differential amplifier applications.
相关资料
- · AD849的技术资料
- · AD8509的技术资料
- · AD848的技术资料
- · AD846的技术资料
- · AD845的技术资料